RADWAG MW-01 Series, User Manual, Page: 6 / 39

6
3. TECHNICAL SPECIFICATIONS
MODEL MW-01 ver.1 MW-01 ver.2
Communication interface
RS232, RS485,
Ethernet
RS232, PROFIBUS
Power supply
8 ÷ 30VDC
Housing metal
Ingress protection IP 66
Operating temperature -
10°C ÷ 40°C
OIML class III
Verification units quantity 10 000
Maximum input signal gain 19.5 mV
Minimum voltage per verification unit
0.5 µV
Minimum load cell impedance 80
Ω
Maximum load cell impedance
1200Ω
Load cell excitation voltage 5VDC
Load cell type 4 or 6 wires + shield
Platform quantity 1
2IN/3OUT Standard
RS232 RS485 baud rate 57600 bit/s by default
3.1. IN/OUT Parameters
The mass converter is equipped with 2 optoisolated inputs, 2 reed switch
outputs and a high speed transistor output (open collector type).
OUT1
– OUT2 Parameters
Output quantity 2
Output type NO type reed switch
Cable cross-section 0.14 - 0.5 mm
2
Maximum output current 200 mA
Maximum output voltage 50VDC
OUT3 Parameters
Output quantity 1
Output type Transistor
Umax 5VDC
Imax 100mA