RADWAG MAS 1. Y, User Manual

Page: 62 / 201

- 62 -
17.2. Mode Related Settings
To find out more about the remaining functions refer to section
15.7 of this user manual
Additional Parameters for a Weighing Process .
18. DOSING
< Dosing> is a working mode that facilitates dispensing process, wherein the dispensing
takes as long as it is necessary to obtain a pre-defined target weight.
Dosing mode screen:
1. Setup – press to access balance menu.
2. Print header – press to print data declared in
the header.
3. Print footer – press to print data declared in
the footer.
4. Products Database – press to select products
from products database.
5. Set Tare – press to enter tare.
6. Target value - press to declare target value.
18.1. Making Use of Products Database in the Course of Dosing Operation
You can use target value assigned to a product or values recorded in
Product Database.
Additionally it is possible to define temporary target values. In case of Product Database the
target value is value entered in the mass field.
Procedure 1 – selecting product from Products Database:
•
Press button (Product database), list of products is displayed.
•
Select the product that is to be weighed.
•
Target and tolerance values are displayed automatically within the Info field.
•
Target value is displayed with minus sign.
•
Bar graph is displayed, its colour corresponds to the current status of mass:
o
yellow: mass value lower than 'target value - tolerance value',
o
green: mass value within permissible tolerance range: 'target value +/- tolerance'
o
red: mass value greater than 'target value + tolerance value'.