45
In order to exit the option of using drying program libraries, disable access to
libraries in moisture analyzer’s menu (
see point 9.3. of this user manual
).
Changing settings of any drying program (finish mode, drying mode,
drying temperature, data to be displayed and printed) in the library,
requires selecting one of drying programs, and then acting as specified in
point 14:
DRYING PROCESS WITH USE OF SHORTENED MENU
.
Additionally, each drying procedure stored in the library allows for using an option of
sample mass control. When enabling the option, a moisture analyzer software
informs the user whether the mass to be tested is within set thresholds, regarding
the mass and tolerance values, on condition that the parameters were determined
for the sample. The sample mass control is visualized by displaying pictograms LO,
OK or HI on moisture analyzer display. The option is implemented for information
purpose only and facilitates a user in preparing the same or very similar sample to
be tested, thus increasing repeatability of measurements. If the pre-determined
mass control criteria are not met (i.e. pictograms LO or HI are displayed), the
moisture analyzer still starts the drying process. Settings of mass control option are
provided below.
