To get started with video calls and videoconferences, activate the product and use the quick
setup wizard to configure the basic settings of the unit. We recommend following the
workflow described in
“Initial Workflow for XT Series Users” on page 9
•
Initial Workflow for XT Series Users ....................................................... page 9
•
How to Control the XT Series ............................................................. page 10
•
Performing Basic Configuration ........................................................... page 17
Initial Workflow for XT Series Users
To quickly get started with your XT Series, follow the steps in this workflow.
Before you begin
Your system administrator should install and activate your XT Series. For details, see the
following documentation:
•
Quick Setup Guide for Scopia XT Series: Explains the simplest configuration necessary for
the system to work properly.
•
Safety Instructions leaflet for Scopia XT Series
•
Installation Guide for Scopia XT Series
Your system administrator may have customized certain features described in this guide to
suit the environment of your company.
Procedure
Step 1
Turn on the XT Codec Unit by pressing the
Power key on the XT Remote Control Unit.
Step 2
Configure the basic settings required to start using the XT Series, as described in
Basic Configuration” on page 17
2
Getting Started
RADVISION | User Guide for Scopia XT4000 Series Version 3.1.1
Getting Started | 9
