The Scopia Elite MCU includes pre-recorded greetings to conference participants and
announcements as each new participant joins the conference. You can record messages to
provide custom greetings and announcements.
Note
If your Scopia Elite MCU deployment includes Scopia Management, use the IVR from
your Scopia Management.
•
Video switching
The MCU supports the switching of HD resolutions 720p and 1080p. Video switching is
available for H.264 and H.263 video codecs.
When using switched video, all endpoints in the conference must support the same
resolution. If a network experiences high packet loss, switched video might not be
displayed properly for all endpoints in the conference.
•
Recording via moderator menu
Moderators can record meetings using the Scopia Elite MCU moderator menu.
Note
This feature is only relevant if your Scopia Desktop deployment includes the
recording option.
Technical Specifications
This section details the system specifications of the Scopia Elite 6000 Series MCU you
purchased. Refer to this data when preparing system setup and afterwards as a means of
verifying that the environment still complies with these requirements.
refers to the physical details of the device.
Table 1-1
Physical device specifications
Scopia Elite MCU 6105, 6110
and 6120
Scopia Elite MCU 6140
System power requirements
100-240 VAC, 50/60 Hz
100-240 VAC, 50/60 Hz with
hot-swap redundant AC power
supply and feed (optional)
Maximum power consumption 200W (682 BTU/h)
360W (1228 BTU/h)
Operating temperature
10°C to 35°C (50°F to 95°F)
Relative humidity
5% to 90% non-condensing
Storage temperature
-40°C to 70°C (-40°F to 158°F), ambient
Physical dimensions
Height: 43mm (1.7"), width:
437mm (17.2"); depth 650mm
(25.6")
Height: 43mm (1.7"), width:
437mm (17.2"); depth 716mm
(28.2")
RADVISION | Installation Guide for Scopia Elite 6000 Series MCU Version 8.0
About the Scopia Elite MCU | 5
