8 SCOPIA
100
MCU Quick Start
C
ONFIGURE
THE
MCU IP A
DDRESS
You set the IP address, default router IP address, and subnet
mask as follows:
Procedure
1.
At the colon, type
N
to configure default network
port values and press
Enter
.
The default network port value configuration options
Figure 4
Configuring Default Network Port
Values
2.
Type the IP address, default router IP address, and
IP subnet mask, pressing
Enter
to proceed from
one parameter to the next.
3.
Press
Q
to finalize the new settings and return
to the main menu.
The MCU automatically resets itself.
Enter values for default network
port
Enter IP Address for default
Interface
Without leading zeros
<172.20.27.105>:
Enter Default Router IP Address
for default Interface
Without leading zeros
<172.20.254.254>:
Enter IP Mask for default
Interface
Without leading zeros
<255.255.0.0>:
