RadTech LS Tractor LW3150, Operator And Parts Manual

Page: 13 / 44

ASSEMBLY
OM 0467QH-A [11]
Installation of the Supports
WITH FRONT LOADER
1. Figure 1: Remove the two hex bolts from the
front bow (item 1) on the right side. Remove
the four hex bolts (item 2) from the front
loader bracket. The bolts will NOT be
required for subframe installation.
2. Group all the items listed in the table of
figures 2.
3. Figure 2: Attach without tightening the
right support (item 1) to the front of the
tractor with a M12 x 1.75 x 50mm hex bolt,
12mm lockwasher and 12mm flat washer
(items 2,3 and 4). Taking care to pass the
exhaust outlet into the clearance hole of the
right support.
4. Figure 2: Attach without tightening , the
right support (item 1) over the front loader
bracket (item 7) with three M12 x 1.75 x
50mm hex bolts, 12mm lockwashers, and
12mm flat washers (items 6,3 and 4).
5. Figures 2a-2b: Attach without tightening ,
the two hose supports (item 5) at a 25° angle
with two M12 x 1.75 x 50mm hex bolts,
12mm lock washers and 12mm flat washers
(items 6,3 and 4).
N° DESCRIPTION - FIGURES 2 QTY
1 Right support 1
2 Bolt hex. M12 x 1.75 x 50mm Gr. 10.9 2
3 Lockwasher 12mm 6
4 Flat washer 12mm 6
5 Hose support 4
6 Bolt hex. M12 x 1.75 x 50mm Gr.10.9 4
7 Front loader bracket -
Figure 2a
Figure 1
Figure 2b