11
Manual
–
Wifi module
7
Tips and troubleshooting
7.1
Login without WPS
If your access point or router does not have a WPS function,
you may be able to temporarily enter its network identifier and
password into a friend's router that supports WPS and thus
connect to the WLAN module. The module will save the
identifier and password and then connect to your router later
as well.
In the meantime, a video tutorial is also available on the
product page on how to control the module itself as an access
point and how to store the access data.
7.2
Device does not respond in tool mode
Some support calls reached us because the connection setup
via our Windows tool did not work. These were the two most
common causes:
a) The right dip switch on the module was not switched up to
tool mode. This switch is used to toggle between HTML/tool
mode. Currently, both modes cannot be operated in
parallel. To switch, please de-energize the device.
b) If the connection via Windows tool is unstable despite the
dip switch, please check if no browser tries to access the
module via HTML anymore. Sometimes the browser
continues to run e.g. on the cell phone and thus disturbs
the communication.
