Rado 111, Instruction Manual

Page: 32 / 36

29
to set the time
position 3
Pull the crown out to position 3 and turn
it forward or backward to the desired time.
Synchronize the seconds by pushing
the crown back to position 1 to coincide
with a given time signal.
**rotating bezel on diver watches (fig. ic)
The rotating bezel is located under the
protective covering of the sapphire crystal
and can be manipulated with crown B.
Short time measurement
Unscrew crown B. Turn the crown to move
the 60-minute marker to the position of the
minute hand. Screw crown B back in place.
The elapsed time can subsequently be read
off on the inner rotating bezel.
Self-Winding WatcHeS
WitH day/date diSplay
fig ii
caliberS : 636, 648
tHe croWn HaS 3 poSitionS
normal position
position 1
When pressed up against the case
(position 1), the crown ensures that the
watch is water-resistant (if not damaged).
to set the date
position 2
Pull the crown out to position 2, turn
it clockwise to set the desired date. Turn
it counterclockwise to set the desired
day of the week. Push the crown back
to position 1.
Note: Date setting is not recommended
between 8 pm and 2 am.