Page
6
of
13
00.09-014 Rev. C
–
Radlink Wireless C-Arm Kit User Manual (11/15/16)
Warnings for Radlink Wireless C-Arm Kit unit (Continued)
Position the Radlink Wireless C-Arm Kit so the mains plug is readily
accessible for quick disconnection from the power supply
Antennas for the Wireless Router (12-14-003) inside of the Wireless
C-Arm Kit must be 20cm from all persons & must not be co-located or
operating in conjunction with any other antenna or transmitter
The on-board wireless LAN Adapter in the Raspberry Pi 3 (12-14-005)
should be installed & operated with minimum distance of at least
20cm between radiator and human body and must not be co-located
or operating in conjunction with any other antenna or transmitter,
except in accordance with FCC multi-transmitter product guidelines
The Radlink Wireless C-Arm Kit
does not create any “waste products”
during standard use. The device owner should properly dispose of
the GPS Wireless C-Arm Kit hardware in accordance with government
regulations at the end of the device life
The Radlink Wireless C-Arm Kit uses batteries. The device owner
should properly dispose of the GPS Tablet
’s batteries in accordance
with government regulations at the end of the device life
WARNING - The Radlink Wireless C-Arm Kit is not configurable (or
reconfigurable)
An additional multiple socket-outlet or extension cord shall not be
connected to the Radlink Wireless C-Arm Kit while plugged in and
charging
Only connect items that have been specified as part of the Radlink
Wireless C-Arm Kit or have been specified as being compatible with
the unit
To disconnect the Radlink Wireless C-Arm Kit from power, unplug the
charging cable from the side of the device
The accessories of the Radlink Wireless C-Arm Kit and modifications
during the actual service life require evaluation to the requirements
of IEC 60601-1
WARNING
–
To prevent falling hazards and potential damage, place
the Radlink Wireless C-Arm Kit securely on tables or hanging locations
using the support lanyard
