Page
7
of
13
00.09-014 Rev. C
–
Radlink Wireless C-Arm Kit User Manual (11/15/16)
FREQUENTLY USED FUNCTIONS
System Start-up
1.
The Radlink Wireless C-Arm Kit runs on battery power, so it may not be necessary to plug
the unit into power in order to start the system
2.
Press the
Power Switch
on the bottom side of the Wireless C-Arm Kit to turn it on. The blue
lights will illuminate within 5 seconds as the system powers on. If not, plug in the unit
System Shut-down
1.
Shut-down the Wireless C-Arm Kit by pressing the
Power Switch
on the bottom side
2.
The blue light will turn-off, to indicate that the Wireless C-Arm Kit has been powered-off
Charging the Radlink Wireless C-Arm Kit
1.
Plug the Radlink Wireless C-Arm Kit Charging Cable from the wall power source into the
power port on the side of the Wireless C-Arm Kit unit. Charge the Radlink Wireless C-Arm
Kit using the below provided charging cable (Radlink Part #: 12-30-017).
Wireless C-Arm Kit
Power Button
The third conductor (circular)
is a functional earth
connection (ground)
