USING THE INFLATOR
1. Loosen the adaptor locking collar by turning it counter-clockwise.
2. Insert the air hose into the adaptor locking collar, and tighten clockwise.
3. Attach the chosen adapter to the air hose and screw clockwise until it is
securely in place.
WARNING
Improperly attached hoses or accessories can become detached under pressure and
cause serious injury. Possible air leaks can cause faulty pressure readings. Make sure
all connections are tightly secured.
TURNING INFLATOR ON/OFF
2. During use, check the pressure gauge for the desired pressure.
3. When desired pressure is achieved release the trigger to stop the air pump.
pressure gauge.
• Bicycle tires
• Air mattresses
WARNING
with a tire pressure gauge.
WARNING
INSTALLING THE AIR HOSE
1. Rotate the air hose retaining collar (1) counter clockwise approximately 1 full
turn (Fig. 4).
2. Insert the threaded end of the air hose (2) into the rubber seal in the center of the
(3) retaining collar.
rubber seal.
14
6311-000
20V MAX AIR COMPRESSOR KIT
