SHARPENING TOOLS
1.
Place the sharpener on a stable table or
bench.
2.
Plug the sharpener into a
120v~ 60Hz
outlet.
3.
Turn the tool ON by setting the switch to
the
“I” position.
4.
Allow the sharpener to run for a few
minutes.
5.
Choose the desired sharpening slot.
according to the tool to be sharpened
.
a.
To sharpen hatchets and similar tools, insert the
blade of the tool into the sharpening slot and
pull the tool toward you, never push it! (Fig.
1)
b.
To sharpen knives and kitchen utensils, place
the blade in the guide and
pull the item to be
sharpened toward you, never push it! (Fig. 2)
c.
To sharpen scissors, place the blade in the
guard on the oblique cut side
and pull toward
you, never push blade. (Fig.3)
SHARPENING DRILL BITS
1.
Insert the Drill Bit Holder into the Guide and ensure the “rib” on the Holder matches with the
rib on the Guide. (Fig. 4). Open the Drill Bit holder (turn counterclockwise) and adjust the
depth dial to the desired setting. Adjust this setting with the plunger up and the positioning
claws closed: O is the least material removed, 3 is the most (used for damaged drill bits)
(Fig. 5).
IMPORTANT: Ensure you adjust the depth within the number range on the scale.
(
Fig. 4)
(Fig. 5)
Fig.
2
Fig.
3
Fig.
1
Summary of Contents for 1281-112
Page 16: ...15...
