11
2. Release the trigger switch while continuing to press the lock-on button. Then stop
pressing the lock-on button. The sander will continue to run.
3. To turn the sander OFF, squeeze the trigger switch then release it.
Fig. 4
3
2
1
Fig. 3
VARIABLE SPEED CONTROL
The speed of the sander can be increased or decreased by rotating the speed control
wheel (3) (Fig. 4). Set the speed control wheel at #1 for the slowest speed. Set the speed
control wheel at MAX for the fastest speed.
CHANGING A SANDING BELT
The sanding belt must be changed for the following reasons:
•
The belt is badly worn or torn
•
The belt is filled with sawdust or paint
•
A different grit is required
2
3
4
5
6
1
Fig. 5
WARNING:
Always remove the plug from the power source before attempting to
change the sanding belt.
1. Pull the belt tension release lever (1) away from the side of the sanding belt carrier (2)
