4
3 Quick Start Guide
3.1 Power Supply
To supply power for the camera, 6 AA batteries are needed. Confirm
that the power switch is in OFF position and pull out the battery pack
by pressing Battery Button. Load the fully charged batteries into the
pack according to the polarities signs. Push the battery pack back into
the battery chamber.
The following batteries with 1.5V output can be used:
1.High-density and high-performance alkaline batteries
(recommended)
2.Rechargeable alkaline batteries (not work in higher and lower
temperatures)
3. Lithium batteries (for the cooler season)
3.2 Insert the SD card
Be sure to insert the SD card with contacts facing down otherwise the
camera will not function correctly.
Caution: Risk of explosion if battery is replaced by an
incorrect type. Also dispose of used batteries according to the
instructions. Correct Disposal of this product. This marking
indicates that this product should not be disposed with other
household wastes throughout the EU. To prevent possible
harm to the environment or human health from uncontrolled
waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To return your used
device, please use the return and collection systems or
contact the retailer where the product was purchased. They
can take this product for environmental safe recycling.
