Page 8
Version 1.0
5
Installing Your Receiver
5.1
Before You Start
CAUTION:
Do not place the receiver near any heat sources or in strong sunlight.
Protect all cables from damage caused, for example, by sharp edges.
This appliance must only be used with a mains voltage of 230 V (
±
10%), 50 Hz.
Install the antenna in accordance with the manufacturers instructions.
The following information is necessary for programming the digital components:
-
your time zone (= deviation from GMT – see appendix),
-
summer time yes/no,
-
picture format for your TV,
-
The appropriate LNB oscillator frequency (referred to in the “LNB Local-Frequency” menu),
-
Programme frequencies and polarities for manual programming (available in satellite magazines,
specialist stores).
You must program the EPSILON 3 ci before use. Full instructions are provided in Section 6. If you are in a
hurry and if you already have experience programming receivers, you can use the Quick Guide to get
started.
Installing Your Receiver
