Page 14
Version 1.0
MENU/EXIT
Setup Value
Satellite
Installation
1 - 3 - 2
Signal Stength
DiSEqC/22KHz
Auto Search
LNB Lokal-Freq
Manual Search
UNIVERSAL
MHz
•
Use the
-key or
-key to highlight one of the preset frequencies or enter
your LNB-converter's local-oscillator frequency using the numerical keys.
•
Confirm your choice/entry by pressing the MENU-key.
6.5.3 Adjusting the DiSEqC-Controller and/or Enabling/Disabling the 22-kHz Control Signal
NOTE:
This adjustment selects the correct segment of the frequency bands. The
DiSEqC-controller (this feature will be available for use only if your satellite sys-
tem is equipped with a DiSEqC-switch) incorporates all items of information
needed for making this setting, i.e., upper/lower frequency band, horizontal/verti-
cal polarization, and the type of satellite system involved.
Impostazioni DiSEqC:
Tono DiSEqC:
Opzione:
Polarizzazione:
orizzontale/verticale
Banda LNB:
9,75 GHz/10,6 GHz
1
2
3
4
5
6
7
8
9
10
11
12
13
14
SAT A
SAT B
SAT C
SAT D
15
16
14 V 14 V 18 V 18 V 14 V 14 V 18 V 18 V 14 V 14 V 18 V 18 V 14 V 14 V 18V 18 V
9.75 10.6 9.75 10.6 9.75 10.6 9.75 10.6 9.75 10.6 9.75 10.6 9.75 10.6 9.75 10.6
A
A
A
A
B
B
B
B
A
A
A
A
B
B
B
B
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
The upper/lower frequency bands will have to be manually set by enabling or
disabling the 22-kHz control signal if the satellite system in use is not equipped
with DiSEqC. To make this setting, proceed as follows:
•
Use the
-key or
-key to highlight the "DiSEqC/22 kHz" field and confirm
your choice by pressing the MENU-key.
Programming Your Receiver
…
