3
2/2
mounting inStRuCtionS
thank you for choosing a product from RaDiuS DeSign.
you can find more products at:
www.radius-design.com
1
turn the seat shell upside down and slide the nut sheets into the
provided openings.
1x seat shell; 1x leg frame; 1x carrier plate; 4x nut sheets;
4x screws; 2x mounting rails.
2
place the carrier plate on the seat shell as displayed. ensure that
the arrow on the inside points to the front and make sure that the
holes of the seat shell and carrier plate are align.
tighten the screws with the washers and the mounting rails and
fasten the frame to the seat shell and the carrier plate. make sure
that the clamp mountings rest against the upstanding markings.
MU
clamp mountings
place the leg frame on the carrier plate and ensure that the nothes
in the frame face forward and turn the flat side of the clamp moun-
tings to the seat shell.
4
