RadiSys EPS-6315, Hardware Reference Manual, Page: 59 / 123

Chapter 4: BIOS configuration
49
CMOS Save & Restore sub-menu
Use the options in this menu to save, restore, or erase CMOS settings in the FBD
(Flash Boot Device).
Figure 4-13. CMOS Save & Restore sub-menu
Main
F1 Help
↑↓
Select Item –/+ Change Values F9 Setup Defaults
ESC Exit
←→
Select Menu Enter Select Sub-Menu F10 Save and Exit
PhoenixBIOS Setup Utility
Exit
<Tab>, <Shift-Tab>, or <Enter>
selects field.
Item Specific Help
CMOS Restore Condition: [Never]
Save CMOS to Flash
Restore CMOS from Flash
Erase CMOS from Flash
CMOS Save & Restore
Field Description
CMOS Restore Condition Determines the conditions under which the BIOS restores
CMOS RAM from the FBD when booting.
You can select one of these:
• CMOS Corruption
• Never (default)
• Always. Select this option if your system does not have
battery backup.
Save CMOS to Flash Immediately saves current settings in the Setup program to
CMOS RAM and into the FBD. This process may take
several seconds to complete.
Note : Always select this option before restoring CMOS
from Flash.
Restore CMOS from Flash Immediately restores CMOS RAM and current settings in
the Setup program from the FBD.
Note : This option is available only if the CMOS was
previously saved to the FBD.
Erase CMOS from Flash Immediately erases the CMOS image stored in the FBD.