EPC-3221 CompactPCI
®
System Controller Board and C1XTN02 Transition I/O Module
14
Service Manual
Step 2: Install the SCB
Overview
Before you connect any peripheral devices to the EPC-3221, install the SCB onto a passive
backplane in a chassis.
Installing the SCB
To install the SCB (
Figure 6
):
1. Power-off the system and disconnect all power cords.
Note:
Use a grounding wrist strap or other static-dissipating device when accessing and
handling the equipment.
2. Locate the system slot on the CompactPCI passive backplane.
3. Unlock the injector/ejector levers on the SCB I/O panel (if required).
4. Align the edges of the SCB with the card guide rails in the chassis subrack. Make sure that
both injector/ejector handles on the SCB are in the open position before attempting to
insert the board.
5. Insert the SCB into the chassis subrack with the card edges in the card guide rails.
Carefully push the SCB into the chassis subrack until the CompactPCI connectors engage
the connector body at the backplane.
Note:
The alignment pins on the SCB I/O panel will be inserted into the alignment holes
in the card guide rails.
6. Simultaneously lock both injector/ejector levers on the SCB I/O panel. Inspect the SCB
faceplate to make sure it is fully seated.
7. Tighten the captive fasteners on the I/O panel to the subrack front rails. (The captive
fasteners secure the SCB in the chassis subrack.)
8. Install transition I/O module, if present. See
Step 3: Install the C1XTN02 Transition I/O
Module
on
page 16.
9. Connect peripheral devices to the SCB and XIO. See
Step 4: Attach Peripheral Devices
.
10. Reconnect all power cords and power-on the system.
To install the EPC-3221 onto a passive backplane not manufactured by RadiSys, consult the
instructions provided by the backplane manufacturer.
The CPU requires unimpeded airflow across the processor within the temperature
specifications outlined on
page 28
. Operations outside these specifications could void the
warranty.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
