Pacific Accessory Corporation
®
| Ph. 866-931-8021 | [email protected]
©2015 Pacific Accessory Corporation
www.pac-audio.com
Pacific Accessory Corporation
RP4.2-HY12
Radio Replacement &
Steering Wheel Control Interface
for Hyundai Veloster
Rev. 101515
Page 7
Pulsed -
This selection will provide a user programmable timed 12v+ output that can be tied to any of the vehicles SWC. This
means that when you press the assigned SWC, the red/white wire will pulse for the pre-programmed user time. The range for
pulse time is 100 milliseconds - 25.5 seconds (.1-25.5).
RadioPRO App (cont.)
Pioneer Parking Brake -
Turning this feature on will make the parking brake output produce the necessary sequencing for
settings menu access. This sequencing is based on the actual parking brake, meaning to produce this sequence you have to
engage the parking brake in the vehicle. If you would like to manuallly do the necessary parking brake sequencing for Pioneer,
simply leave this feature off. Restoring factory settings on the module will default this setting back to off.
Factory Amplifier Settings
The RadioPRO app will also allow you to adjust the settings of the factory amplifier. You can adjust Amp Gain, Fader, Balance,
Bass, Mid & Treble. PLEASE NOTE: If you want to adjust the fader with the aftermarket radio in vehicles equipped with an
amplifier, you must use the RP5.2-HY11. Restoring factory settings on the module will default all values back to middle.
Firmware Updates
The RadioPRO app will also allow you to update the interface with new firmware as it becomes available. Please visit www.pac-
audio.com or contact our tech support department to see if there is a firmware update for your interface.
