Radionode RN172-W, Manual

Page: 13 / 20

©2016 DEKIST Co., Ltd. Rev. 1.6
7. Telnet (command)
While the RN171 device is in operation, the user may access the device through Telnet. After accessing
the device through Telnet, input the AT command to view or change the settings of the RN171 device.
The default port number is 23.
AT Command Contents Answer
DATA ATDC Checks the current CH1 and CH2 values. “ATDC 29.11 , 22.11 ”
S
Y
S
T
E
M
ATSQUIT
Disengages the current connection.
[disconnection]
ATSCON Enters the console mode. It works the same
way as the USB console reconfiguration. [CONSOLE MODE]
ATSRESET Resets the RN172. [RESET]
ATSMODEL Shows the model name of the RN172
product. “ATSMODEL RN171-W”
B
U
Z
Z
E
R
ATBSET Temporarily activates the internal buzzer of
the RN172. “OK”
ATBAL +
[“OFF”,”CH1”,”CH2”,
“OR”,“AND”]
Chooses the alarm condition.
OFF: Do not use the alarm.
CH1: Alarm activated on Channel 1.
CH2: Alarm activated on Channel 2.
OR: Alarm activated on CH1 or CH2
AND: Alarm activated on CH1 and CH2
“OK” or “NOT_OK”
ATBMIN1 + [Value] Input the Min value of Channel 1. “OK” or “NOT_OK”
ATBMAX1 + [Value] Input the Max value of Channel 1. “OK” or “NOT_OK”
ATBMIN2 + [Value] Input the Min value of Channel 2. “OK” or “NOT_OK”
ATBMAX2 + [Value] Input the Max value of Channel 2. “OK” or “NOT_OK”
OTHERs OTHERs Meaningless command
“NOT_OK”