25
GB
FM Operation
Press MODE on the unit or on the remote control repeatedly to select FM radio.
Auto Scan
While listening to an FM station, press SCAN on the unit or on the remote control to
perform auto scan. Once a station has been found, the scanning will stop automatically.
Manual Tune
To tune FM frequency manually, turn SCROLL dial on the unit or press
on the remote
control until your desired frequency is reached.
Each turn will adjust the frequency by 0.05MHz. If reception is still poor, adjust the
position of the DAB/FM aerial or try moving the radio to another location.
Scan Setting
1. In FM mode, press MENU on the unit or the remote control to display the FM menu.
2. Turn SCROLL dial on the unit or press
on the remote control to select Scan
setting and then press SELECT on the unit or OK on the remote control to confirm.
3. Turn SCROLL dial on the unit or press
on the remote control to select Strong
stations only to receive strong stations only or All stations to receive all stations then
press SELECT on the unit or OK on the remote control to confirm.
Audio Setting
1. In FM mode, press MENU on the unit or the remote control to display the FM menu.
2. Turn SCROLL dial on the unit or press
on the remote control to select Audio
Setting then press SELECT on the unit or OK on the remote control to confirm.
3. Turn SCROLL dial on the unit or press
on the remote control to select Forced
mono to listen to Mono only, or Stereo allowed to let the unit select Stereo or Mono
automatically.
4. Press SELECT on the unit or OK on the remote control to confirm.
Presetting Stations
You can store up to 10 of your favourite stations to the memory. This will enable you to
access your favourite stations quickly and easily.
1. To store a preset, you must first be listening to the station that you would like to save.
2. Press and hold the target preset button (1-10) on the remote control until the unit
shows “Preset # stored”.
1. Alternatively press and hold PRESET on the unit to display the Preset Store
<#: (Empty)>.
2. Turn SCROLL dial on the unit or press
on the remote control repeatedly to select a
preset number.
3. Press SELECT on the unit or OK on the remote control to confirm, and the unit shows
“Preset # stored”.
RNRDWH_O13E_IB_130806_Michelle.indb 25
6/8/13 4:50 PM
