Radiometer Analytical TitraLab 870, Reference Manual

Page: 238 / 286

Titra Lab ® TitraLab 870 Reference Manual
Page 238
Standard unit
incompatible Manual reprocessing error: The calibration method used for the
reprocessing has a standard definition different from the calibration
curve stored.
Edit the parameters of the calibration method to be reprocessed
(Standard menu).
Start addition Define when the reagent addition will be performed.
Start addition = Initial addition
The addition is performed at the start of the titration (titrant predose
included).
Start addition = After EP no. x (or IP no. x)
The addition is performed after EP no. x (or IP no. x). The titration to
the next EP (or IP) starts at the end of the time entered for Delay after
addition.
Enter in:
Edit method > Parameters (if Addition = Yes)
Edit reagent > Calibration parameters (if Addition = Yes)
Initial addition is the only option available in Continuous IP
mode.
Start from Command of the Sequence/Sample stack window that enables to
start a TIM or SAC sequence from a beaker number of your choice.
Refer to "Sequence/Sample stack menu", page 229 .
Refer to "Running a TIM sequence", page 218 .
Refer to "Running a SAC sequence", page 217 .