Radiometer Analytical TitraLab 870, Reference Manual

Page: 237 / 286

Titra Lab ® TitraLab 870 Reference Manual
Page 237
Standard menu This menu is available for reagent that are edited with the
Titre = Calibrate option. In this menu, identify and enter
the concentration of the standard solution that will be used for the
reagent calibration.
To access:
1. From the Reagent window, press 4 .
2. Select the reagent to be edited.
3. Press 2 and check that the Titre = Calibrate option has
been selected.
4. Use the LEFT/RIGHT arrow keys to move to the last display.
5. Press 2 Standard.
Standard
potential Refer to "Direct ISE measurement method - definition", page 95 .
Standard
solution
(conductivity
measurements) Refer to "Standard (conductivity standard)", page 235 .
Standard
solution (ISE
measurements)
Refer to "Solution menu", page 233 .
Standard
solution
(reagent
calibration) Refer to "Standard menu", page 237 .