Radiometer Analytical TitraLab 870, Reference Manual

Page: 139 / 286

Titra Lab ® TitraLab 870 Reference Manual
Page 139
Insert method
menu Use this menu to set the ID and the type of method to be inserted
before or between two methods in a sequence. This menu is the same
as Add method,
see "Add method menu", page 46 .
To access:
Press 2 in the Edit sequence menu.
The sequence must contain at least one method.
Install burette The burette must be installed before installing a reagent.
Proceed as follows:
If required, use the burette functions to replace or remove the
installed burette.
Press 7 .
Press 5 .
Enter burette volume and
serial number.
Install the burette on the
Titration Manager or the
ABU52 at the address in-
dicated,
see "Address",
page 50 .