Radiometer Analytical TitraLab 870, Reference Manual, Page: 46 / 286

Titra Lab ® TitraLab 870 Reference Manual
Page 46
Add method
menu Use this menu to set the type (Sample, Blank, Electrode calibration,
Reagent calibration or QC sample) and ID of method to be added to a
sequence.
To access:
Press 1 in the Edit sequence menu.
In the title bar, x/y (eg. 1/1) indicates the position "x" of the method in
the sequence and "y" the total number of methods in the sequence.
When a sequence is created <1/1> is displayed.
Method type:
• Sample: measurement or titration method to be performed on
samples.
• Electrode calibration: calibration of pH or ISE electrodes,
calibration of conductivity cells.
• Reagent calibration: calibration of reagent using a titration method.
• Blank: titration method, edited with the Blank option, to be
perfomed on blank samples (usually, a solvent).
Refer to "Blank (Yes/No)", page 67 .
• QC: measurement or titration method, edited with the QC option, to
be performed on QC samples.
Refer to "QC sample (Yes/No)", page 184 .
Method ID:
Depending on the type selected above, select the method in the list
proposed.
To access:
Press 1 in the Edit sequence menu.