RadioLink Electronic Ltd
2
Note:
⚫
NO gyro by default as factory setting. Since integrated gyro in R7FG
will self-check, it is very
important to remain R7FG still when powering it on. There are two LED indicators on R7FG. GREEN
LED (always on) indicates normal working mode while GREEN+RED LEDs (always on) indicate
gyro working mode.
⚫
When R7FG is powered on, the FLASHING green LED means no signal or binding WITHOUT
success. Please bind the receiver to the transmitter.
II. Telemetry
R7FG can return the real-time information such as RSSI, receiver voltage and model battery voltage.
In order to enjoy this function, please upgrade
RC6GS(3-position switch version)
with the firmware
RC6GS_RadioLink_bin_1d15_V_6_0_0
downloaded via
http://radiolink.com.cn/doce/Firmwares/RC6GS&R7FG.rar
Or upgrade RC4GS(produced after 2018-01-01) with the firmware
RC4GS_RX_RadioLink_bin_2f50_V_6_0_1
downloaded via
http://radiolink.com.cn/doce/Firmwares/RC4GS&R7FG.rar
2.1 Telemetry of Signal and RSSI
Power on the transmitter and the receiver and complete the binding, signal will be displayed on the
homepage of transmitter. Short press EXIT twice and enter the interface with returned information
including RSSI value.
Warning can be set with a certain low RSSI value after testing by changing distance:
Press EXIT and ENTER simultaneously to enter MENU=>press Inc(+) to highlight “19. ALARM =>Press
ENTER to (dis)activate the warning and set the RSSI warning value.
2.2 Telemetry of model battery and receiver voltage
Besides the return of receiver voltage, model battery voltage (maximum up to 6S lithium battery) can also
be returned in real time. Users can personalize the warning value of low model battery voltage depending
on the actual needs.
