How to match code with transmitter:
1. Place the transmitter and the receiver close to each other within 1 meters.
2. Turn on the transmitter, then power on the R10DS.
3. Connect CH3 of R10DS to ESC.
4. There is a black button on the R10DS, use a thin stick press the button twice in two seconds
and release, receiver light start blinking, after about 8 times blinking, match code success when
receiver signal LED always on!
Installment of receiver antenna:
1. The antenna must be kept as straight as possible. Otherwise it will reduce the effective range.
2. Make the two antenna keep 90 degree.