RadioLink MINI OSD Manual Download Page 2

Radiolink Electronic Ltd

www.radiolink.com

2

Thanks for purchasing RADIOLINK OSD module for image transmission.
To

fully enjoy the benefits of this product and ensure safety, please read the introduction carefully and

set up the device as described below:

If you found any problems during the operation process, please kindly refer to the manual first. Then

you could contact our distributors to find solution or follow our Facebook homepage

https://www.facebook.com/Radiolink-1455452961436694/

to search related key words. Also you can send

questions to

[email protected]

or

[email protected]

and we will answer your

question at the earliest.

Due to unforeseen changes in production procedures, the information contained in this manual is

subject to change without notice.

For more information please check our website

http://www.radiolink.com

and follow our Facebook

and Youtube homepage.

SAFETY PRECAUTIONS

Never operate model during adverse weather conditions. Poor visibility can cause disorientation and
loss of control of pilots

model.

Never use this product in a crowd and illegal area.

Always ensure the trim levers at 0 and battery properly charged before connecting the receiver.

Always check all servos and their connections prior to each run.

Always be sure about turning off the receiver before the transmitter.

To ensure the best radio communication, please enjoy the flight/driving at the space without
interference such as high voltage cable, communication base station or lauching tower.

WARNING

This product is not a toy and is NOT suitable for children under the age of 18. Adults should keep the
product out of the reach of children and exercise caution when operating this product in the presence of
children.
Please don't operate in the rain! Rain or moisture may enter the transmitter internal through gaps in the
antenna or joystick and cause your car to instability even out of control. If running in the wet weather(such
as game) is inevitable, always use plastic bags or waterproof cloth to cover the transmitter.

Summary of Contents for MINI OSD









Reviews: