RadioLink Electronic Ltd
www.radiolink.com
12
Instructions for using CM210 charger:
1. Insert one end of the standard USB cable into the Type-C input port of the CM210 charger
(as shown in the picture above), and then connect the other end of the USB cable to power
supply equipment such as power bank, computer, mobile phone adapter, etc.. After the right
connection, the red LED indicator will be always on.
2. Insert the balance port of the standard 2S lithium battery of A560 into the charging port of
CM210 (as shown in the picture above). Then the green LED indicator starts flashing, which
means it starts to charge the battery. (Note: The green LED indicator flashes during the
charging to indicate normal charging; If the red LED indicator flashes during the charging to
indicate abnormal charging. Please reconnect battery and cable to troubleshoot the
abnormality.)
3. When all four LED indicators turn solid green, the battery is fully charged, and the charger
will automatically stop charging.
4. Remove the battery and then disconnect the power supply.
CM210 LED indicator status:
LED indicator status
Meaning
All green LEDs flash once
All green LEDs will flash once when the charger is powered
on, indicating that the calibration has been done. (Voltage
calibration has already finished by factory default.)
Red LED is always on
When the charger is powered on and no battery is
connected, the red LED is always on, indicating battery
needs to be connected.
The first green LED flashes The battery voltage is lower than 7.4V.
The first green LED is
always on, and the second
green LED is flashing
The battery voltage is higher than 7.4V and lower than 7.8V.
The front two green LEDs
are always on, and the third
green LED is flashing
The battery voltage is higher than 7.8V and lower than 8.2V.
The front three green LEDs
are always on, and the
fourth green LED is flashing
The battery voltage is higher than 8.2 and lower than 8.4V.
All four green LEDs are
always on
The battery is fully charged.
Red LED flashes during
charging
The charger detects abnormality. Please reconnect battery
and cable to troubleshoot the abnormality.
