35
36
DTMF
Dual Tone Multi-Frequency (DTMF) function allows operating radio when there is
interference in the radio system.
To initiate a DTMF call Setting the Coding sequence table from programming software,
support 16 groups most.
You can set the code sending before PTT transmitter and after PTT transmitter, the
duration time and the interval time of DTMF code sending,
You can disable DTMF tone by turning off all radio tone and prompts.
Secrecy
You can activate or kill any radio in the system. For example, you might want to disable a
stolen radio, to prevent thieves use it, and enable it when you get it back.
Note: radio kill or activation is limited to activate the radios with these functions.
Scan List
Create a scan list and assign to a single channel/talk group, your radio can support up to
16 scan lists, each up to 16 members. Each scan list support mixed analog and digital
channels. You can edit the scan list to add / delete channels or set the priority channel.
Radio activate
This function only applies to private call.
1.Via programming software to edit radio kill function to side key.
2.Via programming software to make the radio can use radio kill function.
3.Via programming cable to choose the private call ID.
talkies and launch radio has the same "encryption keys" (suitable for basic encryption).
If your radio to receive different encryption keys or key values and key encryption call ID,
you will hear the sound of the transport chaos encryption (basic).
Press the preliminary programming encryption keys on or off.
Radio Kill
This function only applies to private call.
1.Via programming software to edit radio kill function to side key.
2.Via programming software to make the radio can use radio kill function.
3.Via programming cable to choose the private call ID
4.If successful, emit a beep and the screen displays radio kill successfully. Or if it fails,
emit a beep and the screen displays radio fail to kill.
During radio kill operation, do not press the [ ] key, because you will not get a
confirmation message.
Scanning instructions and methods
When scanning, your radio can view if there is a voice activity in current channel through
circulating pre-programmed scan list. LED lights flashing for a red light.
When scanning in dual mode, if you're in a digital channel and your radio locking an
analog channel, radio will switch automatically from digital mode to analog mode
throughout the duration of the call. And vice versa.
There are two scanning methods
Manual Scan: According to a pre-programmed scan on / off key to start the scan, when
you start scanning, radio will detect all channels/contact groups on pre-programmed scan list.
