Radiocrafts
Embedded Wireless Solutions
RC2300DK/RC2301DK
©
2007 Radiocrafts AS
RC2300DK/RC2301DK Demonstration Kit User Manual (rev. 2.0)
Page 2 of 17
Introduction
The RC2300/RC2301 Zigbee-ready modules provide a very compact solution for a wide
range of wireless network applications. The kit can be used to develop and test proprietary
protocol applications as well as ZigBee-based applications.
The RC2300 kit is normally shipped with an embedded firmware for range testing, while the
RC2301 kit is shipped with a location demo firmware.
The kit can be used for development of a customer’s proprietary protocol, or any Zigbee
network implementation ported to the RC230x hardware platform. In this case the user would
re-flash the modules with his own application, and the program/debug interface could be used
for debugging also.
The RC2300DK Demonstration Kit is designed to make it easy for the user to evaluate the
module and/or develop an application very quickly. With the RC2300DK Demonstration Kit
you can:
•
evaluate the RF performance of the modules
•
develop your own application interfacing the modules
•
build a prototype of your application
This User Manual describes how to interface the Demonstration Kit and provide detailed
documentation for the Demonstration Board and its onboard resources.
Your RC2300DK Demonstration Kit should contain the following items:
Kit contents RC2300DK
Item
Number of articles
Demonstration Board (RC2300DB)
2
RS232 serial cable (1:1)
2
AC/DC battery eliminator 6VDC
2
Kit contents RC2301DK
Item
Number of articles
Demonstration Board (RC2301DB)
8
RS232 serial cable (1:1)
1
AC/DC battery eliminator 6VDC
7
Quarter wave whip antenna
8
Snap on battery clip (for blind node)
1
