Radiocrafts
Embedded Wireless Solutions
RC1xx0 / 2x00DK
2008 Radiocrafts AS RC1xx0 / 2x00DK Demonstration Kit version 3.0 User Manual (rev. 3.1)
Page 7 of 14
Figure 4. Jumper placement and solder connection for connecting RTS to CONFIG
Connectors
The Demonstration Board is furnished with many connectors for easy access to all module
signals.
P5 (and P13) bring out all the digital data and control lines used to interface the module.
P9 brings out supply voltage and ON/OFF signals. A 2.54 mm pitch pin-row can be mounted
at P9 if convenient.
P6 brings out digital I/O for future use and custom specific applications, and analogue RSSI (if
applicable for the module variant). A 2.54 mm pitch pin-row can be mounted at P6 if
convenient.
P7 brings out digital I/O for future use. A 2.54 mm pitch pin-row can be mounted at P7 if
convenient.
P8, P10 and P11 are for factory test only and not equipped on the PCB.
Push buttons
The Demonstration Board is furnished with four push buttons connected to the control signals:
S1: RXEN. Pressing this button will activate RX when using un-buffered mode.
S2: TXEN. Pressing this button will activate TX when using un-buffered mode.
S3: CONFIG. Pressing this button will activate configuration mode.
S4: RESET. Pressing this button will activate the main RESET of the module.
Using the Demonstration Kit
The Demonstration Kit is useful for providing hands-on experience with the RC1xx0/RC2x00
for both software and hardware developers.
Follow the Quick Start Guide instructions to hook up the kit.
The RC232 User Manual together with the Data Sheet for each specific module provides
information on how to change the configurations of the modules.
Important:
The use of radio transceivers is regulated by international and national rules.
Radiocrafts’ modules meet the regulations in EU and US/Canada for different frequency
variants. Make sure the local regulative are according to these rules. Your local
telecommunication authorities can provide more information on use of un-licensed radio
transmitter in your country.
