PG
8
PG
9
MANUAL Screen Functions
The CT100 has 2 manual override commands. The manual screen is accessed by touching the large
current temperature display in the middle of the HOME screen.
IMPORTANT:
The MODE must be in HEAT, COOL, or AUTO to access the manual screen.
TEMPERATURE
Touch the +/- arrows to select your desired Target Temperature. Touch HOME to
return to operation.
EMER
(in HEAT PUMP type)
If you set your CT100 for HEAT PUMP with auxiliary heat, EMER function is available on the
MANUAL screen. If you touch EMER, it displays EMER|ON. Your HEAT PUMP is disabled and
auxiliary heat is your sole source of heat. This manual override stays active until you toggle EMER
off. Auxiliary heat is more expensive than the heat pump so use EMER only if the heat pump cannot
keep up or is defective.