15
Operation
3. Adjust
LEVEL (MIN/MAX)
to a com-
fortable listening level.
4. Turn up the auto sound system’s
volume control until the sound
begins to distort. Then immediately
turn the volume down to a point just
before where the distortion began.
Caution: Never turn up the auto
sound system’s volume control
more than needed to adjust the
audio level, or more than two-thirds
of its maximum volume.
5. Adjust
LEVEL (MIN/MAX)
until the
sound is at the maximum level you
want the amplifier to produce.
6. Adjust the auto sound system’s vol-
ume control to a comfortable listen-
ing level.
ADJUSTING THE
FREQUENCY
CROSSOVER
If you connected a subwoofer using the
steps in “Connecting a Subwoofer
(Bridged Connection)” on Page 12, set
X-OVER FREQ ON/OFF
to
ON
, then ad-
just
X-OVER FREQ
for your particular ve-
hicle’s acoustics. The amplifier passes
through all frequencies at or below that
setting (45–400 Hz).
Note:
X-OVER FREQ
selects the limit at
which the amplifier will pass frequencies
(from 45–400 Hz). You should not use it
to adjust the sound you hear through
your main speakers.
12-2016.fm Page 15 Monday, April 10, 2000 4:33 PM
