background image

12

Preparation

While the Weatheradio scans for the time
signal, you might see any of the following:

Notes

• In some areas, your Weatheradio might

receive WWVB only during nighttime
hours.

• On very cloudy and stormy days, the

radio signal might not be strong enough
to set the clock.

When the Weatheradio receives a good sig-
nal,

flashes faster, and it automatically

sets the time.

You can also set the clock manually. See
“Manually Setting the Time.”

You can obtain more information about
WWVB on the World Wide Web at:

http://www.boulder.nist.gov/timefreq/wwvsta-
tus.htm

Manually Setting the Time

If the clock does not receive a good radio
signal, you can set the time manually.

1. Hold down 

CLOCK

 until the display

flashes.

2. Repeatedly press (or hold down) 

OK/HR

until the correct hour appears.

3. Repeatedly press (or hold down)

SCROLL/MIN

 until the correct minute

appears.

Notes: 

• If you do not press any button within

30 seconds, the Weatheradio stores
any settings changed to that point
and stops the setup mode.

A

 appears when you set an AM time;

P

 appears when you set a PM time.

4. Press 

CLOCK

 to store the settings.

Selecting the Time Zone

1. Hold down 

CLOCK

 until the display

flashes.

2. Press 

RADIO MEMORY

 

1

4

 to select the

time zone you are in:

1

 (Pacific)

2

 (Mountain)

3

 (Central)

4

 (Eastern)

ZONE

 and a number and a letter (

P

 for

Pacific, 

M

 for Mountain, 

C

 for Central, or

E

 for Eastern) appears. Then 

DAY-

LIGHT

SAVINGS

 then 

ENABLE

 or

DISABLE

 appear (see “Setting Up Day-

light Saving Time”).

Setting Up Daylight
Saving Time

You can set the Weatheradio so it automati-
cally adjusts for daylight saving time, ensur-
ing that the time displayed on the clock is
accurate, regardless of the time of year.

You See

What it Means

The clock received a strong radio 
signal and has already updated 
the time. The icon does not flash.

The clock has not received a 
radio signal strong enough to set 
the time. The icon flashes slowly.

The time and date were set man-
ually. The icon flashes slowly.

The clock is receiving the radio 
signal and the time will be set 
shortly. The icon flashes rapidly.

12-253.fm  Page 12  Tuesday, October 24, 2000  12:27 PM

Summary of Contents for Weather Radio





















Reviews: