12
Follow these steps to operate the stop-
watch.
1. Press
MODE
. A bar flashes above
Su
.
2. Press
START/STOP
to start the stop-
watch. The bars above both
Su
and
Sa
flash.
3. To measure split time (total time
elapsed to that point), press
LAP/
RESET
while the stopwatch is running.
The display stops, but the stopwatch
continues to run internally. The bars
above
Su
,
TH
, and
Sa
flash to show
that the stopwatch is still running.
After you record the split time, press
LAP/RESET
again to return to the run-
ning time display.
63-5029.fm Page 12 Tuesday, July 13, 1999 3:24 PM
