17
USING REDIAL
To quickly dial the last number dialed, lift
the handset and press
REDIAL/PAUSE
.
Then press
TALK
.
Notes:
• You can also press
REDIAL/PAUSE
after pressing
TALK
.
• The redial memory holds up to 32
digits, so you can redial long-
distance as well as local numbers.
• The redial memory also holds pause
entries (see “Entering a Pause” on
Page 19).
USING TONE SERVICES
ON A PULSE LINE
Some special services, such as bank-
by-phone, require tone signals. If you
have pulse service, you can still use
these special tone services by following
these steps.
1. Be sure
DIAL
MODE
is set to
P
.
2. Dial the service’s main number.
When the service answers, press
TONE
on the handset. Any addi-
tional numbers you dial are sent as
tone signals.
3. When you hang up, the phone auto-
matically resets to pulse dialing.
PAGING
To page the person who has the hand-
set or to locate the handset when the
phone is not in use, hold down
PAGE
on
the base for at least 2 seconds. The
handset beeps for 1 minute. To stop it
from beeping sooner, press
TALK
on the
handset twice.
Notes:
• The phone goes off-hook (you hear
the dial tone) the first time you press
TALK to stop the handset from
beeping. If you do not press
TALK
again, the phone remains off-hook.
• If you press
PAGE
for less than 2
seconds, the handset beeps for only
2 seconds.
43-734.fm Page 17 Thursday, February 24, 2000 10:42 AM
