19
TAD OPERATION
SETTING THE TAD TO
ANSWER CALLS
The TAD-733 is ready to answer and
record calls with the prerecorded outgo-
ing message as soon as you connect it
to AC power. To record your own outgo-
ing message, see “Recording an Outgo-
ing Message.”
To turn off the TAD so it does not an-
swer calls, press
ANSWER
on the base,
or press
REMOTE
,
CHANGE (#)
then
AN-
SWER ( )
on the handset. The TAD an-
nounces “Answer off” and the message
counter display clears.
To turn on the TAD, press
ANSWER
on
the base, or press
REMOTE
,
CHANGE (#)
then
ANSWER
( )
on the handset. The
TAD announces “Answer on” and the
message counter shows the number of
recorded messages.
To set the TAD to play an announce-
ment, press
ANSWER
on the base again,
or press
REMOTE
,
CHANGE (#)
then
AN-
SWER
( )
on the handset. The TAD an-
nounces “Announce Only” and the
message counter shows
AO
.
USING THE MAILBOXES
The TAD-733 has a general message
center and two user mailboxes. It is pre-
set to record messages in the message
center, but a caller can record a mes-
sage for mailbox 1 or 2 by pressing
#
then the desired mailbox number within
6 seconds. If the caller presses
#
then 1
or 2 after the outgoing message plays
for more than 6 seconds, the TAD-733
records the message into both the mes-
sage center and the selected mailbox.
Be sure your outgoing message tells the
caller how to record a message for the
desired mailbox.
RECORDING AN
OUTGOING MESSAGE
The TAD-733’s lets you record two sep-
arate messages of up to 60 seconds
each, and it operates differently based
on which mode you select.
• Answer-On — The TAD 733’s prere-
corded outgoing message says,
“Hello, please leave a message af-
ter the tone.” You can also record
your own outgoing message for the
caller to hear when the TAD an-
swers a call.
• Announce-Only — The TAD plays
your outgoing message, but does
not record a message.
If you set the TAD to announce-only,
be sure to state that the caller can-
not leave a message.
43-733.fm Page 19 Friday, September 17, 1999 8:57 AM
