17
For example, if you have Call Waiting,
press
FLASH
to answer an incoming call
without disconnecting the current call.
Press
FLASH
again to return to the first
call.
Note: If you do not have any special
phone services, pressing
FLASH
might
disconnect the current call.
USING REDIAL
To quickly dial any of the last three num-
bers dialed, lift the handset and repeat-
edly press
REDIAL/PAUSE
until the
desired number appears on the display,
Then press
TALK
.
Notes:
• The redial memory holds up to 32
digits, so you can redial long-
distance as well as local numbers.
• The redial memory also holds pause
entries (see “Entering a Pause” on
Page 20).
USING TONE SERVICES
ON A PULSE LINE
Some special services, such as bank-
by-phone, require tone signals. If you
have pulse service, you can still use
these special tone services by following
these steps.
1. Be sure
DIAL MODE
is set to
P
.
2. Dial the service’s main number.
When the service answers, press
TONE
( ) on the handset. Any addi-
tional numbers you dial are sent as
tone signals.
3. When you hang up, the phone auto-
matically resets to pulse dialing.
PAGING
To page the person who has the hand-
set or to locate the handset when the
phone is not in use, press
PAGE
on the
base. The handset beeps for 5 seconds.
For a longer handset beep, hold down
PAGE
for at least 5 seconds. The hand-
set beeps for 1 minute and the display
shows
Paging
. To stop it from beeping
sooner, press
TALK
on the handset
twice.
REDIAL
TON E
PAGE
43-726.fm Page 17 Tuesday, June 15, 1999 8:36 AM
