Need Help? Call 1-800-598-2527
7
CONNECTING THE
SYSTEM TO POWER
Warning: We recommend that you
muffle the alarm’s speaker before you
connect the system to power. The
alert is extremely loud.
Follow these steps to connect the
system to power.
1. Connect the system’s red lead to
your vehicle battery’s positive (+)
terminal.
2. Connect the system’s black lead
to a metal part of the vehicle’s
body or to the battery’s negative
(–) terminal. The system beeps
three times.
ACTIVATING THE
REMOTE CONTROL
You must train the system to respond
to the supplied remote control. To ac-
tivate the remote control, immediately
after applying power, press
DISARM
on the remote. The system beeps
twice.
If the system loses power, the system
stops responding to the remote. To
reactivate it, simply press
DISARM
on
the remote after power is restored.
Your system can learn two remote
codes if you want to add a second re-
mote control (RadioShack Cat. No.
49-845). To activate a second remote
control code, be sure the system is
disarmed, then hold down
ARM
for 10
seconds. The system beeps three
times. Press
DISARM
on the new re-
mote to activate it. The system beeps
twice to confirm it has learned the
new remote’s code.
49-810.fm Page 7 Thursday, August 19, 1999 10:07 AM
