background image

3

FREQUENCY RESPONSE

SPECIFICATIONS

Frequency Range  .................................................................................................................................................. 38–150 Hz

Resonant Frequency  ............................................................................................................ ...................................... 37.8 Hz

Power Handling  ....................................................................................................................  200 Watts RMS/400 Watts Max

Nominal Impedance ...................................................................................................................................................  4 Ohms

Piston Area  ................................................................................................................................................. 55.1 In

2

, .0356 M

2

Magnet Weight ...............................................................................................................................................................  25 oz

Flux Density  ............................................................................................................................................................. 10.25 Tm

DC Voice Coil Resistance .....................................................................................................................................  3.35 Ohms

Voice Coil Inductance  ...............................................................................................................................................  2.14 mH

Total Q Factor  .............................................................................................................................................................  .58 Qts

Electrical Q Factor  ...................................................................................................................................................... .61 Qes

Mechanical Q Factor .............................................................................................................................................. 11.78 Qms

Equivalent Acoustic Volume  ....................................................................................................................................... 1.37 Ft

3

Mechanical Suspension Compliance ....................................................................................................................  .219 mm/N

Mechanical Mass of Cone Assembly and Free Air Load  ............................................................................ ..................  80.9 g

Mechanical Mass of Cone Assembly only  ....................................................................................................................  77.0 g

Peak to Peak (maximum) Linear Excursion ...............................................................................................................  .7187 In

Sensitivity ....................................................................................................................................  87.9 dB (1 Watt @ 1 Meter)

Cone ................................................................................................................................ 10 Inches, Wet Look Treated Fiber

Voice Coil ............................................................................................................................. 1.5 Inches, Kapton MTB Former

Surround (material of construction)  ............................................................................................................... Polyether Foam

Connectors ..............................................................................................................................................  5-Way, Gold-Plated

Mounting Cutout  ................................................................................................................................................... 9

1

/

16

 Inches

(22.93 cm)

Mounting Depth  .....................................................................................................................................................  4

7

/

8

 Inches

(12.42 cm)

Specifications are typical; individual units might vary. Specifications are subject to change and improvement without notice.

7 0

7 3

7 6

7 9

8 2

8 5

8 8

9 1

9 4

9 7

Frequency (Hz)

SPL(dB)

 

1W/1

m

0.75 Ft

3

 Acoustic Suspension

1.5 Ft

3

 Ported Reflex

1.36 Ft

3

 Single Reflex Bandpass (s=0.6)

2 0

1 0 0

3 0

4 0

5 0

6 0

7 0

8 0

9 0

Summary of Contents for PRO-CSW1000

Page 1: ...tic suspension or ported reflex enclosure we recommend you use the book Building Speaker Systems Cat No 62 1087A available at your local RadioShack store along with this Owner s Manual That book has complete information about build ing enclosures including obtaining construction materi als and design and construction tips Note Check with RadioShack Unlimited for a pre built enclosure for this subw...

Page 2: ...e You can mount an optional speaker plate on your enclosure such as Cat No 274 630 to make it easy to connect the subwoofer to your stereo amplifier This lets you connect the subwoofer to the plate then connect the plate to your stereo amplifier Follow these steps to connect the subwoofer directly to your sound system 1 Run one wire from each of the subwoofer s terminals to the stereo amplifier 2 ...

Page 3: ...embly and Free Air Load 80 9 g Mechanical Mass of Cone Assembly only 77 0 g Peak to Peak maximum Linear Excursion 7187 In Sensitivity 87 9 dB 1 Watt 1 Meter Cone 10 Inches Wet Look Treated Fiber Voice Coil 1 5 Inches Kapton MTB Former Surround material of construction Polyether Foam Connectors 5 Way Gold Plated Mounting Cutout 91 16 Inches 22 93 cm Mounting Depth 47 8 Inches 12 42 cm Specification...

Page 4: ...t of a product defect during the warranty period take the product and the RadioShack sales receipt as proof of purchase date to any RadioShack store RadioShack will at its option un less otherwise provided by law a correct the defect by product repair without charge for parts and labor b replace the product with one of the same or similar design or c refund the purchase price All replaced parts an...

Reviews: