Beyond the Basics
30
disappears. Then press
E
. You can also use
the
0
-
9
keys to select the bank. To continue
searching, press
FUNC
+
SVC
.
If you entered a frequency that has already been
entered elsewhere, the scanner sounds an error
tone and displays the channel that was duplicated.
If you entered the frequency by mistake, press
./CLR
then enter the correct frequency. To enter the
frequency anyway, press
E
to accept.
scanning the stored channels
To begin scanning channels, press
SCAN
. The
scanner scans through all non-locked channels in
the activated banks. (See “locking out channels” on
Page 48 and “turning channel-storage banks on and
off” on Page 48). The scanner stops when it finds a
transmission. When the transmission ends, the
scanner resumes scanning.
Notes:
•
If you have not stored frequencies into any
channels, the scanner does not scan.
•
If the scanner picks up unwanted partial, or very
weak transmissions, turn
SQUELCH
clockwise
to decrease the scanner’s sensitivity to these
signals. To listen to a weak or distant station,
turn
SQUELCH
counterclockwise.
F
