22
Limit Search
If you do not know a frequency to store, you can select a search
band containing a preprogrammed frequency range and search
that range for active frequencies. Then you can store frequencies
you find there into channels.
SRCH
appears on the display during
a search.
1. Press
BAND/•
.
2. Within about 2 seconds, enter the search band number. The
band’s number appears next to
b
on the left side of the dis-
play and the frequency range of the search band appears on
the right. Then the next available channel flashes.
Notes:
•
If you do not press a number key within 2 seconds after you
press
BAND/•
, the number for the previously selected search
band is displayed, then the scanner displays the next avail-
able channel number (or 00 if you have not stored frequen-
cies into any channels). If this happens, simply press the
search band’s number key again to select the band you
want.
•
You can also repeatedly press
BAND/•
in Step 2 instead of
entering a number to select a search band.
After you select a search band, the scanner automatically search-
es from the lower limit to the upper limit through all frequencies in
the search band.
20-561.fm Page 22 Wednesday, August 4, 1999 3:48 PM