Radio Shack Pro-60, User Manual, Page: 14 / 43

You Press You See
MANUAL (NN)CH 000.0000 MAN
8 (NN)CH 8
PGM 8CH 000,0000
166 8CH 166
[.] 8CH 166.
000 8CH 166.000
ENTER 8CH 166.0000 FM
NOTES: The scanner continuously monitors the most recently stored channel.
ERROR appears on the display when you enter a frequency not with-
in the scanner's bands (see "Specifications"). To erase an error,
press CLEAR then repeat Step 3.
4. To program the next channel in sequence, press PGM and repeat Step 3.
NOTE: To change the direction it sequences in, press UP or DOWN before
you press PGM.
To program more channels in any sequence, repeat Steps 2 and 3.
SCANNING THE STORED CHANNELS
1. Press UP or DOWN to select the scan direction.
NOTE: When you first turn on the scanner, the scan direction is always
UP.
2. Press SCAN.
The scanner scans through all non-locked channels in the activated banks
(see "Turning Channel-Storage Banks On and Off" and "Locking Out a
Channel").
NOTE: If the scanner does not scan, re-adjust SQUELCH.
TURNING CHANNEL-STORAGE BANKS ON AND OFF
A more efficient way to scan is to turn off storage banks you do not want
to scan. For example, if you wanted to scan only current police activity,
you would not want the scanner to scan, find, and waste time monitoring
channels in other banks that did not include police frequencies, Instead,
you can turn off the other nine channel-storage banks.
While scanning, press the number key for the bank you want to turn on or
off. The bank indicator turns on or off.
If the bank indicator is on, the scanner scans all channels within that
bank that are not individually locked out (see "Locking Out a Channel").
If the indicator is off, the scanner does not scan any of the 20 channels
within that bank.
NOTES: You can manually select any channel in a bank, even if the bank is
turned off.