21
• Continue the search — press
s
or
t
.
• Hold the scanner on the fre-
quency — press
LIMIT
or turn
the rotary tuner either way one
click.
-h-
appears.
Notes:
• You can press
s
or
t
during the
hold to step through the fre-
quencies toward the upper or
lower limits.
• If you tune to a search skip fre-
quency, the scanner displays
L/O
(see “Search Skip” on
Page 21).
• During the direct search, you
can change the modulation
mode (NFM or AM). See
“Changing the Modulation
Mode” on Page 28.
Press
LIMIT
again or press and
hold
s
or
t
for more than 1 second
to resume the direct search.
Search Skip
You can skip specified frequencies
during a limit or direct search. This lets
you avoid frequencies that have data
tones or are already stored in a chan-
nel. You can program up to 50 fre-
quencies for the scanner to skip.
Notes:
• If you program more than 50 skip
frequencies, each new frequency
replaces one you already stored.
• You can select the skipped fre-
quency when the scanner is in the
hold mode. The scanner displays
L/O
when you select a skipped
frequency.
To skip a frequency, press
S/S
when
the scanner stops on the frequency
during a limit or direct search.
Follow these steps to see which skip
frequencies you have stored.
1. During a limit or direct search,
press
REVIEW
. The first skip fre-
quency appears on the display.
2. Use
s
,
t
, or
REVIEW
to review the
other skip frequencies.
To remove a skip frequency, select
the skip frequency you want to clear
by using
s
,
t
, or
REVIEW
, then press
S/
S
.
To clear all the skip frequencies at
once, while searching for frequencies,
press and hold
S/S
until the scanner
beeps twice.
20-418.fm Page 21 Wednesday, August 4, 1999 12:42 PM
