![background image](http://html.mh-extra.com/html/radio-shack/pro-2039/pro-2039_owners-manual_779404006.webp)
the channel and press DELAY until DELAY appears on the display. When the
scanner stops on the channel, it waits for 2 seconds after each
transmission before it resumes scanning.
To program a 2-second delay for any active frequency while searching, press
DELAY until DELAY appears on the display. When the scanner stops on a
frequency, it waits for 2 seconds after each transmission before it resumes
searching.
To turn off the programmed delay on any active channel, press DELAY while
the channel is still active. DELAY disappears from the display.
LOCKING OUT A CHANNEL
You can scan channels faster by locking out those that have a continuous
transmission, such as a weather channel.
To lock out a channel while scanning, press L/OUT when the scanner stops on
the channel. To lock out a channel manually, manually select the channel
and press L/OUT until L/OUT appears on the display.
To remove the lockout from a channel, manually select the channel and press
L/OUT so L/OUT disappears from the display.
NOTES: You can still manually select locked-out channels.
You cannot lock out all channels. There must be at least one
active channel in a bank.
PRIORITY
The priority feature lets you scan through the programmed channels and
still not miss an important or interesting call on a specific channel. To
program a stored channel as the priority channel, press PGM, the desired
channel number, and then PRI.
NOTE: You can only select one channel as the priority channel.
To turn on the priority feature, press PRI during scanning. PRI appears on
the display. The scanner checks the priority channel every 2 seconds, and
stays on the channel if there is activity. P appears to the left of the
display whenever the scanner is set to the priority channel.
Summary of Contents for PRO-2039
Page 1: ......