2
SELECTING A
MOUNTING LOCATION
Select a location for the Mirror Ball
that is:
• Sturdy enough to withstand the
weight of the motor and the Mir-
ror Ball (try to find a wall stud)
• Near an AC outlet (a 6-foot AC
cord is supplied)
MOUNTING
Note: To keep from getting finger-
prints on the glass, we recommend
that you wear gloves when you hold
the Mirror Ball.
1. Using the motor's mounting
bracket as a template, mark the
locations for the three mounting
screws.
2. Drill three holes
1
/
8
inch in diam-
eter at the marked locations.
3. Using a Phillips screwdriver and
the three supplied wood screws,
mount the motor in the selected
location.
4. Use the supplied “S” hook to
hang the Mirror Ball's ring on the
motor's ring. Make sure the Mir-
ror Ball is attached securely.
5. Use mounting hooks (not sup-
plied) to fasten the AC power
cord to the ceiling or wall
between the mounting location
and the AC outlet. Use an exten-
sion cord if necessary.
Warning: If the AC cord is left
hanging from the mounting loca-
tion, sharp glass edges from the
Mirror Ball might cut the wire's
insulation and cause a shock
hazard.
42-3046.fm Page 2 Wednesday, August 11, 1999 3:19 PM
