19
Care
3. Press down on the top of the
cover near the tab, and remove
the cover.
4. Remove the fuse by pulling the
red ribbon.
5. If the fuse is blown, wrap the
new fuse in the red ribbon and
insert it in the fuse holder.
6. Plug in the AC adapter and reconnect the backup DC
source (if one is used).
7. Replace the cover and tighten the screw.
Warning: For continued protection against fire, replace only
with the same type and rating of fuse.
LIGHTNING
Lightning damage is not common, but it can occur in electronic
devices. A lightning strike near, or directly to, the power line
may cause an excessive surge of voltage that can damage the
alert. If you live in an area that has frequent or severe electrical
storms, we suggest that you purchase a surge protector to help
prevent damage to your alert as a result of power line surges.
Your local RadioShack store has a wide selection of surge pro-
tectors.
Ribbon
Fuse
Fuse
Holder
